TRIPOD LEG ASSEMBLIES:
..are the standard method of ensuring handtools present studs perpendicular to the workpiece.
They allow the visual alignment of the weld stud onto either scribe lines or into shallow indents.
Do not use a manual centre punch.
Tripod leg assemblies are available to complete assemblies or as separate parts.

        

Pt No's	Heavy Duty	Slim-line
Assembly	79-101-050	79-101-060
End Cap	79-101-051	79-101-061
Stud Legs	79-101-052	79-101-062
56mm Legs	79-101-054	79-101-064

OFFSET ATTACHMENTS:
Used for the welding of studs close to an upright surface or into a corner.
Shown picture on left, this accessory allows a stud to be welded as close as 12mm from an upright surface.
This item can also be used with the slim-line end caps.
This assembly must be insulated.
The insulation prevents equipment
shut-down should the assembly touch the end-cap.
Insulation must be checked regularly and replaced if there are signs of wear.

Extension Leg Assemby
Allows the welding of studs up to 150mm in length.
Ideal when welding nail pointed studs or when frequent stud length changes are required and when welding M10 studs.

Leg  (2 off)	Grip (2 off)	End Cap (1)	Guide  (1)
81-101-004	79-101-142	79-101-141	79-101-144
Washer (2)	Foot (1)	Tripod Legs (3)	Nose Cone (1)
81-101-001	79-101-143	79-101-106	79-101-145